Glove box Cleat

By jared9 | Created August 31st, 2019 | Published August 31st, 2019 | Updated August 31st, 2019

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Glove box for cleat wall.

30 min





Files included (9)
2 MB
Glove box bottom.svg
809 B

1/2 plywood glue glove box
1/8 router bit Hammer
This will fit the SO cleat wall. This is made out of 1/2 plywood. I cut small dog bones with the negative off set feature with the 1/8 SO router bit. After I built this I quickly realized that this will only work on the bottom shelf of my cleat wall. To address this I have upload a few other options that would correct this. I have not cut out the other options, but I believe that they will work. I have also the illustrator file. Thanks!

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license