Horizontal Long Tool Organizer

Instructions

As pictured above, this measures 74" tall and protrudes from the wall 8". I made it out of 5/8" baltic birch which provides exceptional strength. Mounted to base panel using Dominos or screws from the back. I also routed a stopped groove in my base panel to accept the organizer; completely optional but provides better support against racking. Use Shaper to cut out the complicated face of the organizer, and a tracksaw or tablesaw to cut the straight back. If you don't want to cut the entire part out using Shaper, you can instead cut out just the templates (Midde/Bottom/Top) using Shaper and then use a router table or handheld router with a template bit. Make two Middle parts and continue to stack them as you move along. This means you can make it as tall as you'd like.