Nesting Trays
Keep your home organized with these modern nesting bowls. Even better, this project is BenchPilot-ready!
12
Decor
Files Included (3)
nesting-tray-large.svg
2 kBnesting-tray-medium.svg
2 kBnesting-tray-small.svg
2 kB
Materials
Hardwood:
7.5" x 5" x 1.25" (Large)
6.25" x 3.75" x 1.25" (Medium)
5" x 2.5" x 1.25" (Small)
Tools
Shaper Origin
Shaper Workstation
Shaper BenchPilot (optional)
8mm collet
8mm x 35mm router bit
19.4mm coving bit
Instructions
This BenchPilot-ready project will give you practice pocketing, whether cutting automatically or manually. Start by pocketing the interior of the bowl with your 8mm x 35mm router bit, then finish the inside using small steps of the coving bit. Finish with an outside cut slightly deeper than your material thickness, ideally with a roughing and a finishing pass for the best possible results.