Cutting Boards

By Shaper

|

BY-NC-SA 4.0 License

|

Created Tue Oct 24 2017

Pick from 5 different cutting board shapes that you can personalize with engravings.

20 min

Easy

242

Kitchen

Files Included (5)

cutting_board_1_rectangle_v001.svg
1 kB
cutting_board_2_bell_v001.svg
901 B

cutting_board_3_hexagon_v001.svg

857 B

cutting_board_4_circle_v001.svg

548 B

cutting_board_5_oval_v001.svg

555 B

Materials

3/4" hardwood

Spoilboard

ShaperTape

Double sided tape

220 Grit sandpaper

Tools

Shaper Origin

¼” Up-Cut Bit

Optional: V60 Engraving Bit, Trim or Table router with round over bit

Instructions

Prepare your workstation

Place your spoilboard on top of your work surface.

We recommend using MDF. This is used so you can cut through your material without cutting up your work table. You can re-use this for future projects.

Place double-sided woodworking tape on top of your spoilboard in the area that you will be cutting. Then place your ¼” plywood for cutting on top of the spoilboard.

This helps hold down the parts that you are cutting so there is no chance of them moving while making cuts.

Clamp the plywood and spoilboard securely to the worksurface.

Always clamp materials to a work surface before cutting so that your materials will not move while you are cutting.

For more instruction on how to setup your workstation, click here.