Coasters & Ornaments
Wooden coasters or ornaments with personalized engravings. A simple first project that makes a nice housewarming gift.
29
Decor
Files Included (51)
AK.svg
4 kBAL.svg
2 kBAR.svg
3 kBAZ.svg
3 kBCA.svg
6 kBCO.svg
1 kBcoasters_ornaments_v001.svg
2 kBCT.svg
1 kBDE.svg
1 kBFL.svg
6 kBGA.svg
4 kBHI.svg
2 kBIA.svg
3 kBID.svg
4 kBIL.svg
4 kBIN.svg
3 kBKS.svg
2 kBKY.svg
5 kBLA.svg
5 kBMA.svg
2 kBMD.svg
2 kBME.svg
4 kBMI.svg
8 kBMN.svg
5 kBMO.svg
4 kBMS.svg
3 kBMT.svg
3 kBNC.svg
5 kBNE.svg
2 kBNH.svg
1 kBNJ.svg
1 kBNM.svg
1 kBNO.svg
2 kBNV.svg
1 kBNY.svg
4 kBOH.svg
4 kBOK.svg
3 kBOR.svg
5 kBPA.svg
2 kBRI.svg
1 kBSC.svg
4 kBSD.svg
2 kBTN.svg
2 kBTX.svg
10 kBUT.svg
1 kBVA.svg
5 kBVT.svg
2 kBWA.svg
5 kBWI.svg
5 kBWV.svg
5 kBWY.svg
1 kB
Materials
1/4" Plywood (or hardwood if desired)
Spoilboard
ShaperTape
Double sided tape
Sandpaper
Optional: Stain or spray paint
Tools
Shaper Origin
¼” Up-Cut Bit
V60 Engraving Bit
Instructions
Prepare your work surface
Place your spoilboard on top of your work surface.We recommend using MDF. This is used so you can cut through your material without cutting up your work table. You can re-use this for future projects.
Apply double-sided tape to the back of your material. Peel the backing and stick it to your spoilboard.
This helps hold down the parts that you are cutting so there is no chance of them moving while making cuts.
Clamp the plywood and spoilboard securely to the worksurface.Always clamp materials to a work surface before cutting so that your materials will not move while you are cutting.
For more instruction on how to setup your workstation, click here