Sculpture Stand
A three legged stand we made to hold a steel sphere sculpture in Shaper HQ
40 min
Intermediate
13
Decor
Files Included (4)
TTS Globe center.svg
1 kBTTS Globe legs.svg
894 BTTS Globe mortise.svg
881 BTTS Globe tenon.svg
802 B
Materials
-Legs= 1.25" thick hardwood
-Center connector= 1.125" thick hardwood
Tools
-Shaper Origin
-Workstation
Instructions
The tenons are meant to be cut to 1" depth. The grid for the leg was made by using the sharp point of the engraving bit as a stylus to prob for the y position (probe 3). It will help to create some sort of reference stop so you can repeat on the other legs. I used a piece of angle iron clamped to my bench.