All material 3/4" thick
-Legs: 26" x 2.5" (2)
-Back Vertical: 30" x 2.5" (2)
-Seat Slats: 17" x 1.5" (6)
-Horizontal Supports: 17" x 2" (3)
-Webbing material for back
-Screws
-Finish washers
-Double Sided Tape
If you would like to customize this chair and build it using on-tool CAD, follow along with the Youtube video of Sessions. If you would prefer to build it in the dimensions I did, you can download the pre-made files for it.
I chose to use some leftover seat webbing from the Stock Chair build, but you can create the bike out of whatever you like!
When attaching the seat slats, it helps to clamp the legs into position and use the webbing material as a spacer. I doubled mine up to make sure there was a little wiggle room as shown in the last photo.