Successfully Added to your Files

Snowman Dish

By Stilwell|BY-NC-SA 4.0 License|Updated October 23rd, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
A nesting set of dishes.

40 min

Easy

184

Files included (1)
NameSize
Snowman_dish_V1.svg
2 kB

3/4" Cherry
Shaper Origin
Material must be at least 6.25" x 13". Thickness is up to you. I used 3/4" so that I could use a piece of 3/4" ply as my tape board. Start by pocketing out each bowl to desired depth. I would leave at least a 1/4" for the thickness of the bottoms. Then cut the outside profiles all the way through. Sand the bottoms of your dishes OR save yourself some time and fill the bottom of the dishes with a thin layer of colored epoxy.