Push Sticks
Three different styles of push sticks for all your pushing needs.
10 min
Easy
589
Jigs & Fixtures
Files Included (4)
Push_Stick_1.svg
1 kBPush_Stick_2.svg
1 kBPush_Stick_3.svg
720 BPush_Sticks_V3.svg
2 kB
Materials
-1/2" or 3/4" plywood
-Double Sided Tape
-Sandpaper
-1/4" bit
-Round-over bit (optional)
Tools
-Shaper Origin
-Trim Router (optional)
Instructions
1. Choose which push stick you want or cut all three. 2. Use double sided tape to hold pieces down. 3. Apply Shaper tape. 4. Place files and cut at appropriate depths and offsets. 5. Optional: use round-over bit for the handles. 6. Sand and Enjoy!