Sewn Dodecahedron

By Liz | Created January 3rd, 2020 | Published January 3rd, 2020 | Updated January 3rd, 2020

uploaded project image
project image thumbnail
An experimental project to try joining wood pieces with thread.

30 min

Easy

3

Category

Other

Files included (1)
NameSize
lampo.svg
782 B

1/4" birch ply flat waxed cord size 150D/0.8mm
Shaper Origin Scissors Leather stitching needle 1/8" bit
1. cut 12 faces with an 1/8" bit 2. clean up any rough edges 3. Sew it together. The sewing part is pretty difficult as the shape comes together. I recommend sewing each corner such that it has all 3 connections stitched on both the inside and the outside. I travelled between corners with a stitch on the inside. My eventual plan is to cut 11 faces from a semitransparent material and then stitch that together and use it as a lamp with either the missing face open to the bottom for a desk lamp or the top for a hanging lamp. It will be easier to stitch with one missing face and you can then pull the stitches tighter which will cause it to flex less once assembled. I plan to update this project once the final version is complete!

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license