Leaf-Shaped Serving Board

By Liz | Created April 9th, 2019 | Published April 9th, 2019 | Updated August 9th, 2019

uploaded project image
project image thumbnail
project image thumbnail
project image thumbnail
A simple design for a leaf-shaped serving or cutting board.

20 min





Files included (1)
simple cutting board-01.svg
442 B

- 1" thick walnut was what I used for the board in the pictures but you could use any wood of any thickness that you want. - 1/4" bit - food-safe finish
-Shaper Origin -sanding paper
These instructions are for cutting from a 1" thick board like I used. If you are using another thickness of board or bit adjust your cut depths accordingly. 1. Place design 2. Cut the hole first and then cut the outline of the board. Cut everything in the following passes: - 0.05" offset, 1/4" depth - 0.05" offset, 1/2" depth - 0.05" offset, 3/4" depth - 0.05" offset, 1" depth - 0 offset, 1" depth 3. Sand & finish with a food safe finish.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license