Paint can holder

By Mark4 | Created June 14th, 2020 | Published June 14th, 2020 | Updated June 14th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Paint cans, 3" max dia 2 additional back spars need to be cut to fit across back, cut on table saw. Can be installed with "standard" cleat cutout on side pieces or just screw to wall using cross bars (spars) in back. Included fusion file if you want to play with it...

50 min

Intermediate

8

Category

Storage & Organization

Files included (3)
NameSize
paint spar v2.svg
4 kB
paint can holder v8.f3d
259 kB

Materials: 1/2" nominal (.483") plywood
Shaper, table saw
None listed

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license