Vacuum Hose Wire Clip
A clip to hold your Origin power cable in line with your vacuum hose while you work, yet is easily unclipped to allow use of the vacuum by itself.
219
Storage & Organization
Files Included (13)
VAC HOSE WIRE CLIP 25mm.svg
1 kBVAC HOSE WIRE CLIP 29mm.svg
1 kBVAC HOSE WIRE CLIP 30mm.svg
1 kBVAC HOSE WIRE CLIP 31mm.svg
1 kBVAC HOSE WIRE CLIP 35mm.svg
1 kBVAC HOSE WIRE CLIP 40mm.svg
1 kBVAC HOSE WIRE CLIP 41mm.svg
1 kBVAC HOSE WIRE CLIP 45mm.svg
1 kBVAC HOSE WIRE CLIP 46mm.svg
1 kBVAC HOSE WIRE CLIP 48mm.svg
1 kBVAC HOSE WIRE CLIP 49mm.svg
1 kBVAC HOSE WIRE CLIP 50mm.svg
1 kBVAC HOSE WIRE CLIP 55mm.svg
1 kB
Materials
1/2" plywood or material of your choice
Tools
An appropriate cutting bit for your chosen material.
Instructions
Measure the outside diameter of your vacuum hose and select the size of clip just smaller than it. For example, the hose that ships with Origin measures about 30.5mm so the 30mm clip should work well with it. A 48mm clip works well with a 1.5" ShopVac hose (their naming convention, not the actual outer diameter). Cut one or more clips and install them on your vacuum hose. You can leave the clips attached to the vacuum hose while still easily securing and loosening Origin's power cable. If you cannot find a clip exactly the size you need you can simply scale the next closest clip larger or smaller as needed to fit your hose. The small amount of scaling necessary should not affect the portion of the clip that holds the power cord enough to matter.