Bit Changing Station
Helps hold the router steady when changing bits.
10 min
Easy
65
Jigs & Fixtures
Files Included (1)
IMG_4150.jpg
422 kB
Materials
3/4" x 5" x 15" baltic birch or similar
Glue
Tools
Shaper Origin
Instructions
This easy project is like having a third hand when it's time to change bits. Just use the on-board design tools. Make a rounded rectangle: W: 2.95 H: 3.08 Radius: .5625 (9/16") After cutting the opening in one end of your 5" x 15" board, cut off about 5" and glue it to the remaining 5" x 10" piece. Sand the edges and round over if desired. I made mine so that the spindle lock button faces forward. To do that, the wider dimension (3.08") must be running vertically. Happy routing!