Dog Bowl Stand
Needed a dog bowl stand that was compatible with a ( trade-marked and therefore not mentioned ) bowl size.
40 min
Intermediate
67
Furniture
Files Included (3)
Dog Bowl Stand.f3d
378 kBdog-bowl-stand-smaller.svg
11 kBdog-bowl-stand-tenon.svg
3 kB
Materials
1' x 2' x 3/4" walnut for top
poplar for legs / rails
Tools
Shaper Origin
Standard router
Table saw
Instructions
I used the shaper to completely cut out the top I then glued up the legs and cut to size w/o taper While still square, used the shaper to cut the tenons Then, cut the taper on the legs and route the sliding dovetail I need to work on my sliding dovetail skills.