Wooden Letter Shape Sorter

By Jim_M | Created December 15th, 2018 | Published December 15th, 2018

uploaded project image
project image thumbnail
project image thumbnail
project image thumbnail
project image thumbnail
Shape and Letter Sorter (for my grandson)

2 hr





Files included (2)
15 kB
26 kB

2' x 2' Sheet of plywood 1/2 Maple boardstock
This was my first SO project. I didn't know what might result so I just used some wood that I had laying around. The project was designed in Inkscape. There was a bit of trial and error before I got output that the Origin would accept. The letters were cut from 1/2 maple boardstock. They have to be taped to a spoil board, which worked well. I used a 1/4 inch cutter, requiring 4 passes to get to through to the spoil board. I cut the letters and shapes out of poplar first as a test then out of maple for the final product.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license