Radius Corner Jigs

By Lee | Created December 16th, 2019 | Published December 16th, 2019 | Updated March 7th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Have you been drooling over Woodpeckers metal corner jigs but don't want to spend $300 on a set??? Well, here are some very simple yet effective corner jigs for using with your router table. Set includes radiuses of: * 1/2" * 3/4" * 1" * 1-1/4" * 1-1/2" * 1-3/4" * 2" * 1/4" - added as individual file, not in complete set file Individual files added so you can cut them out of smaller scraps.

1 hr

Easy

30

Category

Jigs & Fixtures

Files included (10)
NameSize
Corner Jigs and Rack.svg
29 kB
Routing Corner Jig_1_1-4.svg
5 kB

* 28"W x 20"H piece of 3/4" plywood (x1) makes 7 corner gigs and holding rack (Individual jigs can be cut from a 6" x 6" piece of ply) * 8mm x 50mm Festool Domino (x28) (4 per jig)
* Shaper Origin * (Optional) Disc or Belt sander to shorten the length of the Dominos as indicated in the instructions
Pretty self explanatory but feel free to visit my blog for a full set of instructions and additional pics. https://www.beezleecreations.com/blog/2019/12/14/shaper-made-corner-jigs

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license