Butcher Paper Holder
Adjustable butcher paper holder for a Paulk Workbench. I used an old clothes hanger rod and a couple t-track bolts with knobs on each bracket so that the bolt heads didn't stick out. I posted this on my Instagram page a while back but thought I would share it here as well. ;-) https://www.instagram.com/beezleecreations/
10 min
Easy
35
Storage & Organization
Files Included (1)
Butcher Paper Holder.svg
896 B
Materials
* Each bracket uses about 90mm x 240mm 3/4" plywood (x2)
* 4' clothes hanger rod (x1)
* t-track bolt with knob (x4)
Tools
Instructions
1. Cut out bolt groove 2. Cut out outer shape of bracket Viola