"Ultimate" Vertical Workstation
Enhanced version of the Vertical Workstation designed by Shaper. Enhancements include: * Smoother work surface with no thru holes * Completely adjustable vertical support allows for vertical support anywhere along the track and at any angle * Doubles as Shaper Origin shelf when not in use by adding a French Cleat * Larger opening to accommodate larger projects and step support for work surface inserts Additional Accessory: Horizontal Support link in Instructions below.
214
Jigs & Fixtures
Files Included (1)
Ultimate Vertical Workstation.svg
12 kB
Materials
* 48" x 38" sheet of 3/4" plywood (additional plywood needed for custom size inserts)
* (x1) Rockler 48’’ Universal T-Track with Hold-Down Clamps kit (cut t-track into 3 equal sections ~16" each)
* (x3) Rockler Easy-to-Grip 1’’ Round Knob, Female Threading, 1/4’’-20
* (x1) 1-1/2" 1/4-20 T-Bolt, 5 Pack
Tools
* Shaper Origin
* Festool Domino
* Clamps
Instructions
Basically follow the instructions from the Vertical Workstation (https://www.shapertools.com/hub/creators/5b437481a92ce901517c0655/shares/59eecd49a92ce9014344b5ce) ...with the exception that you'll use Dominos to attach the "Back", "Right Side", "Left Side" and the "top" together. There is a Forum post about this project here (https://community.shapertools.com/t/ultimate-vertical-workstation/1672) And a blog post about the design here (https://www.beezleecreations.com/blog/2018/7/5/ultimate-vertical-workstation-for-shaper-origin) I have also designed an additional accessory for this workstation. The Horizontal Support can be found here (https://hub.shapertools.com/creators/59d269961ca17e0010a3e29e/shares/5bec9cb345760d001744340e)