Extension Cord/Cable/Hose Carrying Handle modified for French cleat

By Mark_Evans | Created September 7th, 2020 | Published September 7th, 2020 | Updated September 7th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
This is a mod of the extension cord handle first posted by mecworks. I changed one end and added "wings" to make it compatible with French cleats. The dowel holes are strictly optional and can be resized for any doweling you have around the shop. I made mine from 3/4 ply but most any wood would work. Sorry, hub sw insists on rotating the photo.

10 min

Easy

7

Category

Cleats

Files included (2)
NameSize
FC cord and hose holder center.svg
23 kB
fc cord and hose holder extension.svg
3 kB

I used 3/4 ply but most any wood should work.
Shaper, any finishing tools or supplies desired.
Cut it, glue it. Finish as desired. Staple or glue on double-sided velcro.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license