Finger pull

By Mark_Evans | Created July 31st, 2019 | Published July 31st, 2019

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
I whipped this up to show just how quickly you can create a drawing to inlay hardware based on this thread: The pull can be found here: I've included the Fusion 360 file in case you need to modify or study how I got there.

10 min




Hardware Inserts

Files included (3)
barn door finger pull.svg
3 kB
finger pull v2.f3d
93 kB

Any barn style door.
Shaper Origin chisel to square corners screwdriver
Simply pocket each profile to the desired depth and then come back with an inside cut to clean up. I'd suggest trying on a scrap 2x4 before committing to a good door.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license