Millenium Falcon cheese board
A Millenium Falcon themed cheese board for the Star Wars fans out there.
20 min
Easy
27
Kitchen
Files Included (1)
millenium falcon.svg
115 kB
Materials
3/4th inch board
Tools
2mm bit
A blowtorch
120 grit sandpaper
Instructions
The cheeseboard was cut using a 3/4th inch board of oak from the home center. The lines and the pocket cuts were cut using a 2mm bit and 1/16th inch depth. After the board was cut and engraved, I used a blowtorch to slightly burn the surface. Then sanded it with 120 grit. This cleaned up the surface, but left the outlines of the cuts on the board, making the lines more prominent.