Caribou Night Light

1/2" Plywood 1.25" Hardwood (White Oak in this case)

Shaper Origin

1) Pocketed the inside areas of the nightlight 2) Cutout Carribou geometry 3) On Cad cutout for the LED light cable 4) Cut out back panel from Plywood I ended up glueing the back panel on with hot melt glue, but it did not last long. Suggest as a further improvement to add magnets or make a press fit. Hardware Used https://www.amazon.com/gp/product/B00713R2ZK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1