Magnetic Desk Organizer
Magnetically attached modular desk organizer. Includes - Wireless Charger - Post it holder - Pen Holder - General holders (intention was to use one for airplants)
16
Other
Files Included (2)
charger_cap_top.svg
2 kBModularOrganizer_Full.svg
4 kB
Materials
White Oak - 1.25" Thick
White Oak - 0.29" thick (for charger cap)
Tools
Shaper Origin
Festool Kapex (Miter Saw)
Instructions
Decided to cut all 6 modular organizers in one piece, flip it and make the cut outs for the magnets on the back and then cross cut everything on the miter saw. When I flipped the project over to cut the magnet holes, I set up a grid on the opposite side and set the grid to the radius of the cutter and was able to anchor the svg accordingly. Doing this again, I would space the magnets farther apart (magnetics are plenty strong) so allow more room for the thickness of the Kapex cutter (used a 3/32 blade = 2.38mm). Also the radius in the post it organizer are too large and interfere with the post its. Hardware Used: https://www.kjmagnetics.com/proddetail.asp?prod=D82 https://www.amazon.com/mophie-Wireless-Charge-Optimized-Technology/dp/B075M4ZH17/ref=sr_1_18?s=wireless&ie=UTF8&qid=1526922425&sr=1-18&keywords=iphone+wireless+charger