Yet another Sys1 - Origin Essentials

Shaper SYS1 with blank foam insert

Shaper Origin

List of items in the systainer: 1) Mitutoyo AOS 150mm digital calipers 2) Starrett 12" ruler (0.5in width) 3) Shaper 4mm hex wrench 4) 19mm Open wrench 5) A medium sharpie 6) A mechanical pencil 7) Shaper tape 8) Fastcap metric/standard tape measure 9) 0.25in router cits (0.75in and 1in flute length) Video of the process here: https://www.youtube.com/watch?v=IjGq6d4L8BQ Discuss with the community here: https://community.shapertools.com/t/customizable-shaper-sys-1-megathread/4177 Notes: Test fit and height to individual preference confirm your settings are correct. Individual object outlines are available on ShaperHub under the category "Object Outlines" if you want to create your own arrangement. https://hub.shapertools.com/creators/5d68222279a38a000faca8ca/shares/5e9651a4cd5729000fa2f772 For more detailed instructions see this project by Sam: https://hub.shapertools.com/creators/59b9b947291ebbfa71254b56/shares/5e938182254f6b000fe65982