Create replacement shelves and spoilboards for your Workstation. if you have a tablesaw, it will be far more suited to cutting the spoilboards, but Origin is perfectly capable of making more should the need arise.
414
Shaper Workstation
25mm_spoilboard_v001.svg
50mm_spoilboard_v001.svg
standard_shelf_v002.svg
3/4" ( or 19mm ) mdf works fine for all these parts
1/4" or 6mm cutters will work fine
all cuts are through cuts unless identified otherwise ( the shoulder cut for the screws )
Made by Shaper Tools
© ShaperHub & Shaper Tools, Inc. all rights reserved