Salice Air Hinge

By Sam | Created June 5th, 2019 | Published June 5th, 2019 | Updated August 9th, 2019

uploaded project image
project image thumbnail
project image thumbnail
project image thumbnail
project image thumbnail
Salice Air hinge install files.

10 min




Hardware Inserts

Files included (4)
5 kB
5 kB

8mm diameter long cutting flute cutter: 8mm collet
Before you start you will want some long cutting flute cutters: These 8mm shank ones do the trick: To use this cutter you will also need to by the 8mm collet for Origin: Create the cabinet fixture ( designed it to be made out of 3/4 material ), you can cut the aluminium tabs with an 1/8" oflute cutter, but 1/2" ply might work as a substitute, as long as Origin fits between them. once completed, Place the fixture in the corner of the cabinet, scan the tape field use the grid feature to identify the reference edges. and place the appropriate file in that corner. then with the 8mm cutter installed cut the pockets the depths are identified in the file and the little arrow shows the refernce corner to align to the grid. note: the offset from the edge is hard coded in the files at 3mm i believe, I can adjust them to be whatever offset you require. Here is a quick showcase video of installing an air hinge:

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license