Kreg clamp pocket

By Sam | Created May 20th, 2019 | Published May 20th, 2019

uploaded project image
project image thumbnail
Kreg clamp pocket.

10 min




Jigs & Fixtures

Files included (1)
Kreg base_v002.svg
5 kB

1/4" stock cutter optional: larger cutter for clearing internal material.
Test cut into waste wood first with the 1/4" stock cutter installed cut the perimeter profile 1/4" deep. consider switching ot a larger cutter to clear the internal material. the center pocket is larger than nessesary, enabling you to reverse the mounting of the plate.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license