Soss 212 Invisible Hinge

By Sam | Created July 13th, 2019 | Published July 13th, 2019

uploaded project image
project image thumbnail
project image thumbnail
Soss 212 hinge install file ( 3/16" from edge )

10 min

Easy

4

Category

Hardware Inserts

Files included (1)
NameSize
soss_212_v006.svg
7 kB

Soss 212 hinge
Origin 1/4" to 1/2" diameter cutter with cut flutes longer than 1.1" engraving bit for pilot holes
Be sure to test cut first in inexpencive material to confirm you get the alignment and fit you want before performing the actual hardware installation. Use the grid feature to identify the side of the door you want the hinges to align to. Cut large Pocket first. Cut smaller pocket second. Pilot holes for screws can be drilled by cutting the circles appropriate offset / depth for the cutter you wish to use.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license