Festool OF 1400 Router MicroJig Edge Guide

By Shawn
|
BY-NC-SA 4.0 License
|
Updated Sun Dec 12 2021

Quick and simple shop project for an adjustable edge guide for your Festool OF 1400

20 min
Easy

44

Tools

Files Included (2)

  • of_1400_edge_guide_slot_v02.svg

    3 kB
  • of_1400_edge_guide_v05.svg

    8 kB

Materials

.5 inch plywood

.75 inch plywood

Match Fit Dovetail Cutter

Tools

Instructions

Purchase: 1x: https://www.microjig.com/products/dovetail-hw-6pk 1x: https://www.microjig.com/products/dovetail-bit-14-12 (1/4 inch shank variety) Setup a grid on bottom left of material. For Router Base (.5 inch material) 1) Engrave the lines (optional) 2) Use .25 inch bit to cut interior holes (.5 inch depth) 3) Use .25 inch bit to cut screw holes (.5 inch depth) 4) Use .25 inch bit to cut shoulders for the screw holes (.4 inch depth) 5) Use .25 inch bit to cut the dovetail slots (3/8 inch depth) 6) Use Matchfit Dovetail bit to cut dovetail slots (3/8 inch depth) [WARNING DOUBLE BACK ON PATH AND RETRACT OUTSIDE MATERIAL] 7) Use .25 inch bit to cut exterior of profile (.5 inch depth) For Guide (.75 inch material) 1) cut interior slots online (.75 inch depth) 2) cut exterior (.75 inch depth)


Made by Shaper Tools

© ShaperHub & Shaper Tools, Inc. all rights reserved