Purell Hand Sanitizer Cleat

By Shawn | Created March 19th, 2020 | Published March 19th, 2020 | Updated March 21st, 2020

uploaded project image
project image thumbnail
An easy reminder to stay safe during these crazy times. Always in reach and always on your mind!

10 min

Easy

3

Category

Cleats

Files included (3)
NameSize
purell_cleat_side_a_v01.svg
3 kB
purell_cleat_bottom_v01.svg
4 kB

1/2 inch thickness material (cedar or redwood will help keep away the germs and rot)
Origin Chisel (don't be lazy!)
- Cut 1 of each file. (pocket depths cut to 1/4 of an inch) - Use a chisel to square up all the mating corners. - Smash together with glue. (note: not a replaceable substitute for washing your hands, but can be used in a jiffy) I utilized https://hub.shapertools.com/creators/5e2caeb5b21490000fcf392e/shares/5e46eadece53b3000f11741e for the template! Discussion Thread Here: https://community.shapertools.com/t/purell-hand-sanitizer-cleat/3943/10

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license