Simonswerk Tectus TE 240 3D N Hinge

By Shawn | Created July 9th, 2019 | Published July 9th, 2019 | Updated August 8th, 2019

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Adjustable hardware insert for heavy/large doors.

10 min

Easy

12

Category

Hardware Inserts

Files included (2)
NameSize
Tectus_Door_v02.svg
3 kB
Tectus_Frame_v04.svg
1 kB

8mm Collet (optional) Bit with 27 mm travel
Files for installing a Tectus door hinge. This is a adjustable hinge ~3mm in each direction and is common for large doors. NOTE: there are 2 seperate files and each have different depths Follow instructions on website for offsets from edge, likely you will need to modify depending on your specific setup I converted the DXF's from the webpage below into SVG format using Illustrator. Reference Webpage: https://www.simonswerk.us/productselector/ps/Modell/show/te-240-3d-n.html

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license