Contoured Stool

By Kiley | Created August 9th, 2018 | Published August 9th, 2018

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
For this stool, I tried a technique where I cut the profile of the stool top from the side ~1" deep. I then used that profile as a guide to set depths and cut the top. After moderate sanding, I wound up with a smooth contoured seat.

2 hr

Advanced

13

Category

Furniture

Files included (3)
NameSize
Stool.svg
564 B
stoolleg.svg
728 B

-17" by 11" by 2" Hardwood (Seat) -(4x) 17" by 2" by 2" Hardwood (Legs) -(3x) 11" by 0.75" by 0.75" Hardwood (stretchers) -(2x) 5" by 1" by 1" Hardwood (stretchers)
-1/4" Upcut Bit (with at least a 1" flute length) -Wood Glue -Clamps -Calipers
Loose instructions can be found in this post - https://community.shapertools.com/t/contoured-guitar-stool/

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license